Canon Ij Setup PIXMA MX495

Advertisement

Canon Ij Setup PIXMA MX495

Canon Ij Setup PIXMA MX495

Canon Ij Setup PIXMA MX495 – Ordinance’s PIXMA MX495 is a little inkjet multifunction fringe (MFP) went for home workplaces: in like manner, it can print, sweep or duplicate, and send or get faxes. It’s a keen, reduced gadget with a 20-page programmed record feeder (ADF) incorporated with the scanner cover, so you can allow it to sit unbothered to duplicate longer reports, or send a multi-page fax. There’s help for USB associations and remote systems administration, yet no front-board USB or wired Ethernet port – we wouldn’t really expect either at this cost.


Android application screenshot demonstrating accessible print and sweep choices, PIXMA MX495

^ You can print or sweep with a tablet or cell phone: here we’re utilizing Android


Regardless of the shabby cost and conservative outline, the MX495 is sensibly fulfilling. At the point when not being used, the ADF’s info plate can crease close to keep clean out. In the base there’s a 100-sheet paper plate that slides out, however can’t be expelled, and printed pages are spat into an average, if adaptable, yield plate above it. While this MFP can’t consequently print on the two sides of a sheet of paper, the driver will enable you to do it physically. to conclude, That is the short explaination and review about Canon Ij Setup PIXMA MX495 .

Canon Ij Setup PIXMA MX495 Canon Ij Setup PIXMA MX495 Printer standart Connection Setup

Here some instructions to setup the connection on your printer

  1. Please insert the CD that came with your printer in the box and run the setup.
  2. If you do not have the installation CD, you can download the software below based on your operating system
  3. When the following panel appears on the screen, click on [Next].[MASTER] Picture_PIXMA Wireless Connection tab 2_1
  4. After some step, the screen appears asking you to select between a USB or wireless connection, please select [USB Connection]. Picture_PIXMA Wireless Connection tab 2_4
  5. Turn your printer on, make sure the power lamp is on and then click [Next].[MASTER] Picture_PIXMA Wireless Connection tab 2_5
  6. When The installation is ready, try to print a test page
  7. If the printer is able to print the test page successfully, then the printer is ready to use

Canon Ij Setup PIXMA MX495 Links

Download
Category
Windows all versions 32bit
Windows all versions 64bit

Download
Category
OS X 10.9,OS X 10.8
Mac OS X 10.6

Download
Category
Linux (RPM/DEB)

Canon Ij Setup PIXMA MX495 Canon Ij Setup PIXMA MX495