Canon Ij Setup PIXMA MP130


Canon Ij Setup PIXMA MP130

Canon Ij Setup PIXMA MP130

Canon Ij Setup PIXMA MP130 – If you don’t expect much from an AIO at the $100 price point, the Canon Pixma MP130 Photo All-in-One ($99.99 direct) will be a pleasant surprise. At this price, you won’t get an automatic document feeder (ADF), standalone fax features, or blazingly fast speed. But the MP130 is convincingly faster than other AIOs close to it in price, and it offers high-quality output. It also scans, copies, and prints directly from camera memory cards, and it can scan to a fax program to use your computer’s modem if you have one.

Setup follows the usual steps for an AIO with a USB connection and two ink cartridges, with one exception. Unlike most ink jet printers and AIOs, the MP130 requires manual alignment: You print out an alignment page and then pick the most solid-looking blocks to set the alignment. And you have to go through this minor chore every time you change a cartridge.

Performance (timed with QualityLogic’s hardware and software,, was a bit sluggish compared with that of ink jet printers and AIOs in general. But it was much faster than anything else in the MP130’s price range. On our business applications suite, it turned in a total of 27 minutes 51 seconds, compared with over 35 minutes each for the Lexmark X5250 All-In-One, the HP PSC 1315 All-in-One, and the Dell Photo All-in-One Printer 922. On our photo suite, it averaged 2:34 for each 4-by-6 and 5:58 for each 8-by-10—a bit slower than the Dell 922 but significantly faster than the HP and Lexmark printers.

Output quality is better overall than for most ink jets at any price, with ratings of very good for graphics and photos, and at the high end of very good for text. Graphics show only a few minor issues, most notably a tendency to lose thin lines. Photos reach true photo quality with some images, but not all, primarily due to a slight posterization for some color photos and a slight tint in the monochrome test photo. Roughly half of our test fonts are easily readable at 4 points and none require larger than 10, for a text rating at the high end of very good.

Given this level of print quality, combined with better-than-usual speed for the price, the MP130 is a good value for anyone who doesn’t need an ADF or fax. to conclude, That is the short explaination and review about Canon Ij Setup PIXMA MP130 .

Canon Ij Setup PIXMA MP130 Canon Ij Setup PIXMA MP130 Printer standart Connection Setup

Here some instructions to setup the connection on your printer

  1. Please insert the CD that came with your printer in the box and run the setup.
  2. If you do not have the installation CD, you can download the software below based on your operating system
  3. When the following panel appears on the screen, click on [Next].[MASTER] Picture_PIXMA Wireless Connection tab 2_1
  4. After some step, the screen appears asking you to select between a USB or wireless connection, please select [USB Connection]. Picture_PIXMA Wireless Connection tab 2_4
  5. Turn your printer on, make sure the power lamp is on and then click [Next].[MASTER] Picture_PIXMA Wireless Connection tab 2_5
  6. When The installation is ready, try to print a test page
  7. If the printer is able to print the test page successfully, then the printer is ready to use

Canon Ij Setup PIXMA MP130 Links

Windows all versions 32bit
Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)

Canon Ij Setup PIXMA MP130 Canon Ij Setup PIXMA MP130